|
Model
|
Engine
Rating (h.p.)
|
Max Flow
Rate (litres/hr)
|
Max
Pressure
(p.s.i.)
|
Size
(mm)
|
Weight
(kg)
|
Materials
|
Installation |
Inlet &
Outlet Port Size
|
Comments
|
|
L140 |
 |
Up to
100 h.p. |
140 litres/hr |
40 p.s.i. |
60mm deep
105mm high
787 wide |
0.31 |
LM6 marine grade anti-corrosive aluminium alloy |
Two 8mm mounting holes in the backing flange |
¼" NPT |
Dis-assembly of Tri-Mag voids warranty. |
 L500 |
|
100 to 300 h.p. |
500 litres/hr |
50 p.s.i. |
115mm deep
150mm high
124mm wide |
1.75 |
LM6 marine grade anti-corrosive aluminium alloy |
Two 10mm mounting holes in the backing flange |
½" NPT |
Drain plug and air bleed screw. |
|
L1000 |
|
250 to 600 h.p. |
1,000 litres/hr |
50 p.s.i. |
110mm deep
194mm high
114mm wide |
1.98 |
LM6 marine grade anti-corrosive aluminium alloy |
Two 10mm mounting holes in the backing flange |
½" NPT and DASH 10 SAE |
Drain plug and air bleed screw.
Also Available in Right to Left (Reverse) Flow. |
|
L2000
(Specialised Model - minimum order of 10 units is
normally required) |
 |
600 to 1200 h.p. |
2,000 litres/hr |
50 p.s.i |
170mm deep
360mm high
180mm wide |
7.5 |
316 Stainless Steel |
Four 16mm mounting holes in the backing flange |
1" Hydraulic Connectors |
Drain plug on base.
Also available in Right to Left (Reverse) Flow. |
|
L4000 |
|
600 to 4000 h.p. |
4,000 litres/hr |
50 p.s.i |
386mm deep
260mm high
375mm wide |
17.4 |
LM25 marine grade anti-corrosive aluminium alloy |
Four 16mm mounting holes in the backing flange |
DASH 24 SAE |
Drain plug on base
(½" BSP with Dowty Seal) |
|
L5000 |
|
1000 to
8000 h.p. |
5,000 litres/hr |
50 p.s.i. |
386mm deep
333mm high
375mm wide |
21.5 |
LM25 marine grade anti-corrosive aluminium alloy |
Four 16mm mounting holes in the backing flange |
DASH 24 SAE |
Drain plug on base
(½" BSP with Dowty Seal) |
|
|
